AU Compliant 1967-69 Firebird Front 3-Point Seat Belts

Each set comes with completely assembled driver and passenger side seat belts, two Australian-compliant female ends with a red push button (shown in second picture), Grade 8 bolts, and all other necessary installation hardware and instructions. 

Each pair of front 3-point seat belts will bolt into all existing factory holes in your 1967-69 Firebird. If you have stock seats, the brackets that bolt into the floor are made out of stainless steel and are e-coated black. If you have TMI™ seats or other larger-than-stock aftermarket seats, the brackets that bolt into the floor are extended to accommodate these larger seats and are not e-coated. Please measure from the existing factory hole in the floor to where you just clear the back of the seat, add 2 inches to account for the reel, and choose the appropriate bracket length in the 'Seat Type' drop-down menu when ordering.

The belts are sewn according to the vehicle manufacturer's pattern to increase their strength, and come in all of the colors shown in the color grid picture. Please note that even if a color is ordered, the female end sleeves, floor brackets, and clamshell covers will be black. Reel covers may also be black as only certain colors can be color-matched. 

Our seat belt sets are pull-tested to 3,000 pounds of force weekly to ensure their quality and compliance with the Federal Motor Vehicle Safety Standards (FMVSS). However, our seat belts exceed this 3,000 pound standard by more than 20%. In addition, they are tested according to Australian AS2596 ADR4 E45 standards, and come with the required Australian compliant tags.

Using the drop-down menus, please choose the year of your Firebird, the desired seat belt color, and whether you have stock seats or need the TMI™ extended brackets. If the color you want is not listed, please choose "Other Special Color" and type the color name and/or color code into the "Special Instructions for Seller" box during checkout. Please refer to the color grid picture for this information.

*The bracket in the main picture is for a specific car and year, and is used to represent all GM front 3-point seat belts on our site. The brackets you receive may look slightly different to fit the floorpan of your specific car and year.*