Each rear set comes with driver and passenger side seat belts, two stainless steel brackets, two Australian-compliant female ends with a red push button (shown in second picture), Grade 8 bolts, and all other necessary installation hardware and instructions.
Each pair of rear 3-point seat belts will bolt into the existing holes of your 1967-68 or 1969 Firebird's structure - in the quarter panel/trunk area and under the rear shelf panel. The rear brackets will go around the speakers under the shelf without interference. The belts are sewn according to the vehicle manufacturer's pattern to increase their strength, and come in all of the colors shown in the color grid picture. Please note that even if a color is ordered, the reel covers may still be black as not all colors can be color-matched.
Our seat belts are pull-tested to 3,000 pounds of force weekly to ensure their quality and compliance with the Federal Motor Vehicle Safety Standards (FMVSS). However, our seat belts exceed this 3,000 pound standard by more than 20%. In addition, they are tested according to Australian AS2596 ADR4 E45 standards, and come with the required Australian compliant tags.
Using the drop-down menus, please choose the year range of your Firebird and the desired seat belt color. If the color you want is not listed, please choose "Other Special Color" and type the color name and/or color code into the "Special Instructions for Seller" box during checkout. Please refer to the color grid picture for this information.