Each front set comes with completely assembled driver and passenger side seat belts, and two Australian-compliant female ends with a red push button (shown in second picture). You will need to use your original bolts for installation.
Each pair of front 3-point seat belts will bolt into the existing holes of your 1974-81 Camaro. The belts are sewn according to the vehicle manufacturer's pattern to increase their strength, and come in all of the colors shown in the color grid picture. Please note that even if a color is ordered, the female end sleeves will still be black.
Our seat belts are pull-tested to 3,000 pounds of force weekly to ensure their quality and compliance with the Federal Motor Vehicle Safety Standards (FMVSS). However, our seat belts exceed this 3,000 pound standard by more than 20%. In addition, they are tested according to Australian AS2596 ADR4 E45 standards, and come with the required Australian compliant tags.
Using the drop-down menus, please choose the desired seat belt color. If the color you want is not listed, please choose "Other Special Color" and type the color name and/or color code into the "Special Instructions for Seller" box during checkout. Please refer to the color grid picture for this information.