1969 Firebird Front 3-Point Seat Belts
1969 Firebird Front 3-Point Seat Belts
Each set comes with completely assembled driver and passenger side seat belts, two female ends with your choice of buckle style, Grade 8 bolts, and all other necessary installation hardware and instructions.
Each pair of front 3-point seat belts will bolt into all existing factory holes in your 1969 Firebird. If you have stock seats, the brackets that bolt into the floor are made out of stainless steel and are e-coated black. If you have TMI™ seats, the brackets that bolt into the floor are extended to accommodate these larger seats and are not e-coated. Please measure from the existing factory hole in the floor until you just clear the back of the seat, add 2 inches to account for the reel, and choose the appropriate bracket length in the 'Seat Type' drop-down menu when ordering. The belts are sewn according to the vehicle manufacturer's pattern to increase their strength, and come in all of the colors shown in the color grid picture. Please note that even if a color is ordered, the female end sleeves, floor brackets, and clamshell covers will be black. Reel covers may also be black as only certain colors can be color-matched.
Our seat belt sets are pull-tested to 3,000 pounds of force weekly to ensure their quality and compliance with the Federal Motor Vehicle Safety Standards (FMVSS). However, our seat belts exceed this 3,000 pound standard by more than 20%.
Using the drop-down menus, please choose the buckle style you would like (buckles shown in second picture), desired seat belt color, and whether you have stock seats or need the TMI™ extended brackets. If the color you want is not listed, please choose "Other Special Color" and type the color name and/or color code into the "Special Instructions for Seller" box during checkout. Please refer to the color grid picture for this information.