AU Compliant 1968-72 Oldsmobile Cutlass Convertible Front 3-Point Seat Belts
AU Compliant 1968-72 Oldsmobile Cutlass Convertible Front 3-Point Seat Belts
Each set comes with completely assembled driver and passenger side seat belts, two year-and-car specific brackets, two female ends with your choice of buckle style, Grade 8 bolts, and all other necessary installation hardware and instructions.
Each pair of front 3-point seat belts will bolt into existing factory holes in your 1968-72 Cutlass Convertible. You will have to drill one hole using the bracket as a template. The brackets that bolt into the floor are pre-assembled on each reel at the correct angle, are made out of stainless steel, and are e-coated black. The large brackets that bolt into the structure of your car as the third point are also made out of stainless steel, but are not e-coated. The belts are sewn according to the vehicle manufacturer's pattern to increase their strength, and come in all of the colors shown in the color grid picture. Please note that even if a color is ordered, the female end sleeves (for bucket seats) and floor brackets will still be black. Reel covers and top mount covers may also be black as not all colors can be color-matched.
Our seat belt sets are pull-tested to 3,000 pounds of force weekly to ensure their quality and compliance with the Federal Motor Vehicle Safety Standards (FMVSS). However, our seat belts exceed this 3,000 pound standard by more than 20%. In addition, they are tested according to Australian AS2596 ADR4 E45 standards, and come with the required Australian compliant tags.
Using the drop-down menus, please choose your seat type and desired seat belt color. If the color you want is not listed, please choose "Other Special Color" and type the color name and/or color code into the "Special Instructions for Seller" box during checkout. Please refer to the color grid picture for this information.