Skip to product information
1 of 4

AU Compliant 1970-73 Firebird Rear 3-Point Seat Belts

AU Compliant 1970-73 Firebird Rear 3-Point Seat Belts

Regular price $400.95 USD
Regular price Sale price $400.95 USD
Sale Sold out
Please allow up to 4 weeks for colors other than black, as some aren't always kept in stock and will be made-to-order.

Made to fit.



Each rear set comes with driver and passenger side seat belts, two stainless steel brackets, two Australian-compliant female ends with a red push button (shown in second picture), Grade 8 bolts, and all other necessary installation hardware and instructions. 

Each pair of rear 3-point seat belts will bolt into the existing holes of your 1970-73 Firebird's structure - in the quarter panel/trunk area and under the rear shelf panel. The rear brackets will go around the speakers under the shelf without interference. The belts are sewn according to the vehicle manufacturer's pattern to increase their strength, and come in all of the colors shown in the color grid picture. Please note that even if a color is ordered, the reel covers may still be black as not all colors can be color-matched.

Our seat belts are pull-tested to 3,000 pounds of force weekly to ensure their quality and compliance with the Federal Motor Vehicle Safety Standards (FMVSS). However, our seat belts exceed this 3,000 pound standard by more than 20%. In addition, they are tested according to Australian AS2596 ADR4 E45 standards, and come with the required Australian compliant tags.

Using the drop-down menus, please choose the desired seat belt color and the type of reels you prefer. If the color you want is not listed, please choose "Other Special Color" and type the color name and/or color code into the "Special Instructions for Seller" box during checkout. Please refer to the color grid picture for this information.

If you choose the standard reels, they retract and lock up like modern car seat belts. However, if you choose ratcheting reels, they will ratchet back once pulled all the way out and will not loosen until the seat belt is fully retracted again. These are a premium option, and are perfect for car seats!

Disclaimer: Morris Classic Concepts, LLC is not liable for any bodily injury or death resulting from improper installation of our seat belts, which includes ANY deviation from the instructions. Adding any hardware, making any modifications, tampering with the entirety of the seat belt kit in any way, as well as not using all components of the seat belt kit provided exempts Morris Classic Concepts, LLC from all liability in the case of accident, injury, or death as it has no control over the use, misuse, or alteration of the seat belts after they leave our possession. 
Receipt and acceptance of this product confirms acceptance of this disclaimer.

Part Numbers
With Standard Reels: MCSBR-3-BK-E4
With Ratcheting Reels: MCSBRR-3-BK-E4

The part numbers above is for black seat belts. 
For other colors, please change the "BK" to the desired color code.
View full details