Each rear set comes with driver and passenger side seat belts, two stainless steel brackets, two Australian-compliant female ends with a red push button (shown in second picture), Grade 8 bolts, and all other necessary installation hardware and instructions.
Each pair of rear 3-point seat belts will bolt into the existing holes of your 1966-67 or 1968-73 Chevelle's structure - in the quarter panel/trunk area and under the rear shelf panel. The rear brackets will go around the speakers under the shelf without interference. The belts are sewn according to the vehicle manufacturer's pattern to increase their strength, and come in all of the colors shown in the color grid picture.
Our seat belts are pull-tested to 3,000 pounds of force weekly to ensure their quality and compliance with the Federal Motor Vehicle Safety Standards (FMVSS). However, our seat belts exceed this 3,000 pound standard by more than 20%. In addition, they are tested according to Australian A52596 ADR4 E45 standards, and come with the required Australian compliant tags.
Using the drop-down menus, please choose the year range of your Chevelle, the desired seat belt color, and the type of reels you prefer. If the color you want is not listed, please choose "Other Special Color" and type the color name and/or color code into the "Special Instructions for Seller" box during checkout. Please refer to the color grid picture for this information.
If you choose the standard reels, they retract and lock up like modern car seat belts. However, if you choose ratcheting reels, they will ratchet back once pulled all the way out and will not loosen until the seat belt is fully retracted again. These are a premium option, and are perfect for car seats!
Orders can take 1-2 weeks to ship, depending on the options chosen.
*The bracket in the main picture is for a specific car and year, and is used to represent all rear 3-point seat belts on our site. The brackets you receive may look slightly different to fit your specific car and year.*